Sawtooth Standards | Door Coves & Adjustable Shelves | Sideboard Pt 10

Before starting on the sawtooth standards, we’ll need to add a detail to the sliding doors that I nearly forgot about: finger holds. To make sure the door has something to grip, we’ll simply add a cove to the edge. I only added one cove to my doors but might consider adding another later. After all, the doors need to slide in both directions.

For the adjustable shelves, there are several ways we can have them interact with the case. Typically we use a series of holes and shelf pins but on a piece like this, I felt we should go the extra mile by building sawtooth standards. If you’re not familiar, this system includes standards that are notched so they can receive shelf supports that run from front to back. It’s a very cool but labor intensive choice that has the added bonus of requiring no metal or plastic. A classy way to construct adjustable shelves!

Looking for the Summary version of this build? Click here!

Don’t miss the pre-order price for Philip Morley’s Tambour Record Console course. Price goes up February 9th!

Stuff I Used:

• Bumblechutes Finish – Save 10% with code TWW10
• Amana Countersink Bit
• Backside Sandpaper
• Milwaukee Die Grinder
• Carbide Burr (Ball)
• Large Core Box Bit
• Mouse Card Scraper
• Leigh Dovetail Jig
• My Vacuum Press Setup
• Taper Maker Hardware Kit
• RevMark White Marker
• White Pencil
• Festool Domino
• Festool OF1400 Router
• 1/4″ Upspiral Bit
• Titebond Extend
• Dovetail Bit
• Milwaukee Die Grinder
• Cove Bit
• Preppin Weapon Sanding Block
• Milwaukee Compact Router

Download the FREE Plans:

• PDF Cut List & Plan
• PDF Cut List & Plan (Metric)

The post Sawtooth Standards | Door Coves & Adjustable Shelves | Sideboard Pt 10 appeared first on The Wood Whisperer.