Invite People

Share 4Engineers with your friends and help them get started!

Emails
Enter multiple email addresses by separating it with a comma.
Back
4Engineers
· Jays Custom Creations
AI summary

Based on the provided excerpt: The author’s 40′×60′ shop has its electrical panel in one corner, making long electrical runs to the far side costly and difficult. To add exterior perimeter lighting without complex wiring, they opted for standalone solar lights and shared a non-affiliate link to the product they used.

Have you tried solar lighting for workshops or outdoor spaces—what brands or setups have given you the best results?

Day 800 – Going Solar, kinda, sorta, but not really

This article was originally posted on jayscustomcreations.com.
Our shop is 40′ x 60′ with the electrical panel mounted in one corner. That makes electrical runs on the opposite side of the shop a bit challenging and expensive. The obvious solution to putting perimeter lights outside is to go solar. So we did. Solar lights (not an affiliate) https://m.sakerplus.com/funnel/landing-sakerplus-solar-street-lights-yn

Login to comment

Login
Discussion

1 comment

Collapse this comment
dee 3 months ago
Solar solves the trenching, but in our winters these die by January unless you mount the panel steep (60 - 70 degrees), run motion-only most of the night, and use LiFePO4 packs you can replace. If you want low-maintenance, a single MWBC along the eave with a photocell and LED wall packs has been cheaper for us over 5 years than ladder time swapping dead solar heads.
Report content
Reason Description