Invite People

Share 4Engineers with your friends and help them get started!

Emails
Enter multiple email addresses by separating it with a comma.
Back
4Engineers
· Chemical Engineering Online
AI summary

I couldn’t access the full article because it’s protected. In general, selecting a pyrolysis model should start from the engineering decision you need to make: define required outputs (overall yields vs. detailed product slate), operating regime and reactor type (fast/slow; fixed/fluidized/entrained), spatial resolution needs (lumped vs. reactor-scale transport), available data for calibration, and acceptable uncertainty and run time. Choose the simplest model that answers the decision: empirical/lumped yield models for screening; global/DAEM kinetics for devolatilization; semi-detailed cracking/tar networks when product distribution matters; fully coupled heat/mass transfer and CFD for reactor design and scale-up. Calibrate to the specific feedstock, check sensitivity/uncertainty, validate against experiments, and only raise model fidelity if it changes the decision.

What decision are you trying to support (e.g., feedstock selection, reactor sizing, product optimization, emissions control), and what accuracy and turnaround do you need from the model?

Protected: Choosing Pyrolysis Models: Start with the Engineering Decision

This article was originally posted on Chemical Engineering.

There is no excerpt because this is a protected post.

The post Protected: Choosing Pyrolysis Models: Start with the Engineering Decision appeared first on Chemical Engineering.

Login to comment

Login
Report content
Reason Description